User Manual

Rev. 1.20

Introduction

     anyCast is a Wi-Fi display receiver, which supports the Miracast standard for Android & Microsoft Windows, and DLNA for the home multimedia application. Furthermore, it also complies with Apple AirPlay mirroring for iOS and Mac OS X. Enjoy screen mirroring with AnyCast!
Support@Any-Cast.com

Hardware Installation


Please follow below steps to setup AnyCast:
Step 1: Connect WiFi cable (micro USB head) to AnyCast dongle main body.
Step 2: Plug the AnyCast into the HDMI port of your TV and switch to the right input source.
Step 3: Plug USB cable into an external USB power adapter. Note: 1 Amp current supply is highly recommended for reliable Wi-Fi connection.
Step 4: You should see the main AnyCast page after power on

Mode Switching Button


Press this button for switching between AirPlay and MiraCast Mode

Airplay for iOS (iPhone/iPad)


Step 1: Switch to Airplay mode by pressing button
Step 2: Get SSID and password on screen
Step 3: Establish WiFi connection between iOS device and AnyCast.
Step 4: Turn on Airplay and select AnyCast’s SSID

MiraCast for Android


Step 1: Switch to Miracast mode by pressing button
Step 2: Miracast mode ready
Step 3: Find the Miracast function on your Android device (such as screen mirroring/miracast/smart view).
Step 4: Establish Miracast connection between Android device and AnyCast.

AirPlay Mirroring for Mac OS X

Step 1: Switch AnyCast Dongle to the Airplay/DLNA mode, then connect your Mac to AnyCast Dongle via WiFi (SSID should be AnyCast ###, and read the 8-digit password/PSK on screen).
Step 2:Step 2: Switch on AirPlay of your Mac

MiraCast for Windows

Step 1: Switch to Miracast mode by pressing button
Step 2: for Window 10, launch the “Windows Start Menu > Settings > Connected devices > Add a printer or scanner”, and then search for AnyCast Dongle. After that, you may start to mirror. For Windows 8.1, launch the “Windows Start Menu > Settings > PC and devices > Devices > Add a device”, and then search for AnyCast Dongle. After that, you may start to mirror.

Connect to WiFi Router


Step 1: Switch to Airplay mode by pressing the button, and then get the IP address of your AnyCast on screen.
Step 2: Use the browser on your device to access the IP address of AnyCast, and select your WiFi router.
Step 3: Enter password.
Step 4: Connect to your WiFi router.

    Setting and Firmware Upgrade


After connected with AnyCast, an IP address will be shown on the setup screen. Please launch browser on your devices (iOS/Android/Mac/Windows etc.) and then enter the IP address accordingly (ex: 192.168.203.1)
     Internet: Setup the router connection for your AnyCast. (Note: The connection between AnyCast and your device may be disconnected when you switch to router connection) Language: Change the language of AnyCast Password: Change the password of AnyCast Default Mode: Select AirPlay or Miracast as boot up default mode Resolution: Change output resolution of AnyCast Upgrade: upgrade the firmware of AnyCast. Note: Required Internet connection on your AnyCast Dongle. IMPORTANT! Please upgrade to the latest version in order to compatible with up-to-date devices.