G2 - User Manual

G2 - User Manual

User Manual          Rev 1.00

 

Download EZMira App

Please Scan QR code on screen to download App for quick connection and setup for iOS and Android devices.

Download EZMira iOS / Android Apps >> 

Download EZMira Windows >>

 

IMPORTANT! The new AnyCast products are supported by EZMira. If you plug your dongle and find out the barcode on the home menu doesn't link to EZMira, then it means that your dongle does not yet support EZMira.

 

 

Video Guide

https://www.youtube.com/c/wifidisplayreceiveranycast

Subscribe to our handy videos to learn more about mirroring with AnyCast.

 

Hardware Installation

G2

  1. Turn on your TV and power up the dongle by connecting the USB cable from the dongle to a USB adapter. Please place the Wi-Fi receiver at a location with good Wi-Fi reception.
  2. Connect the dongle directly into an HDTV input port on your TV.
  3. Set your TV’s Source/Input selection to HDTV input port connected to the dongle.
  4. Your dongle now starts up and will display instructions on your TV screen. Follow the instructions to complete setup.

 

Setup for iOS (iPhone/iPad)

G2

  1. Wait for main screen after power on.
  2. Connect your iPhone with via Wi-Fi. Launch browser (http://192.168.203.1) on your iPhone to setup Internet for MiraScreen (connect to your Home WiFi Router).

Note: You need to restart after setup.

Note: You may also AirPlay directly to without connecting to Home WiFi router

  1. Connect you iPhone to Home WiFi Router. Swipe up on your iPhone and tap on AirPlay Mirroring, then select as target.
  2. Your iPhone/iPad screen will be shown on your TV through.

 

Setup for Android

G2

  1. Wait for main screen after power on.
  2. Turn on your Android menu, and then enable Miracast.
  3. Select as target and wait for connection.
  4. Your Android screen will be shown on your TV, reconnect if necessary

 

Complete Help to Using AirPlay and Miracast

Learn how to use AirPlay or Miracast with your phones: https://any-cast.com/pages/help

 

Setup for Mac

G2

  1. Wait for main screen after power on.
  2. Connect your Mac with via Wi-Fi. Launch browser (http://192.168.203.1) on your Mac to setup (Connect to your Home WiFi Router).

Note: You need to restart after setup.

Note: You may also AirPlay directly to without connecting to Home WiFi router

  1. Connect you Mac to Home WiFi Router. Turn on AirPlay, then select as target.
  2. Your Mac screen will be shown on your TV through.

 

Setup for Windows

G2

  1. Wait for main screen after power on..
  2. For Windows 8.1, execute “Windows Start Menu > Settings > PC and devices > Devices > Add a device”, and then search for MiraScreen dongle.
  3. For Window 10, execute “Windows Start Menu > Settings > Connected devices > Add a printer or scanner”, and then search for MiraScreen dongle.
  4. Your Windows screen will be shown on your TV through MiraScreen connection.

Note: Windows 7 users, please directly download the EZMira for Windows >>

 

Settings and Firmware Upgrade

  • Internet: Connect your AnyCast to local Wi-Fi network.

Note: The connection between AnyCast and your device may be disconnected when AnyCast connects to local Wi-Fi network instead.

  • Language: Change the language of AnyCast
  • Password: Change the password of AnyCast
  • Default Mode: Select AirPlay or Miracast as boot default mode
  • Resolution: Change the output resolution of AnyCast
  • EZAir mode:
    • Mirror only (recommended).
    • Mirror+streaming for iOS 11.1 and 11.2.
  • Upgrade: upgrade the firmware of AnyCast.

Note: Requires internet connection to your AnyCast dongle.

IMPORTANT! Please upgrade to the latest version in order to support all the latest devices.

     

      Repair Tool

    In rare events where you might have trouble OTA the dongle firmware to the latest version, you may consider using the Repair Tool to upgrade your AnyCast dongle.

    Check out G2 repair tool >>

     

     

    Customer Service

    Support@Any-Cast.com

    We’d love to hear from you!

     

    More details about G2 >>




    Also in User Manual

    M100 - User Manual
    M100 - User Manual

    AnyCast is a WiFi display receiver, which supports the Miracast standard for Android & Microsoft Windows, and DLNA for the home multimedia application. Furthermore, it also complies with Apple Airplay mirroring for iOS and Mac OS X. Enjoy screen mirroring with AnyCast!

    Continue Reading

    M9 - User Manual
    M9 - User Manual

    AnyCast is a WiFi display receiver, which supports the Miracast standard for Android & Microsoft Windows, and DLNA for the home multimedia application. Furthermore, it also complies with Apple Airplay mirroring for iOS and Mac OS X. Enjoy screen mirroring with AnyCast!

    Continue Reading

    K4  - User Manual
    K4 - User Manual

    K4 is a wireless screen mirroring receiver. K4 supports any smartphone (Android/iPhone/iPad), PC, Windows and Mac laptop. This user manual guides users to quickly and easily complete all setups of K4 setting step by step.

    Continue Reading