K4 - User Manual

K4  - User Manual

User Manual          Rev 1.00

 

Download EZMira App

Please Scan QR code on screen to download App for quick connection and setup for iOS and Android devices.

Download EZMira iOS / Android Apps >> 

Download EZMira Windows >>

 

IMPORTANT! The new AnyCast products are supported by EZMira. If you plug your dongle and find out the barcode on the home menu doesn't link to EZMira, then it means that your dongle does not yet support EZMira.

 

 

Video Guide

https://www.youtube.com/c/wifidisplayreceiveranycast

Subscribe to our handy videos to learn more about mirroring with AnyCast.

 

Hardware Installation

K4

  1. Turn on your TV and power up the AnyCast dongle by connecting the USB cable from the dongle to a USB adapter. Please place the WiFi receiver at a location with good WiFi reception.
  2. Connect the AnyCast dongle directly into an HDTV input port on your TV.
  3. Set your TV’s Source/Input selection to HDTV input port connected to the AnyCast dongle.
  4. Your AnyCast dongle now starts up and will display instructions on your TV screen. Follow the instructions to complete setup.

 

Setup for iOS (iPhone/iPad)

     K4

     

    1. Press the button on AnyCast dongle to switch to AirPlay mode. You will find SSID and Password of AnyCast on your TV screen.
    2. Connect your iPhone/iPad with AnyCast via Wi-Fi.
    3. Swipe up on your iPhone and tap on AirPlay Mirroring, then select AnyCast as target.
    4. Your iPhone/iPad screen will be shown on your TV through AnyCast.

     

    Setup for Android

    K4

    1. Press the button on AnyCast dongle to switch to Miracast mode.
    2. Turn on your Android menu, and then enable Miracast*.
    3. Select AnyCast as target and wait for connection.
    4. Your Android screen will be shown on your TV, reconnect if necessary.

     

    Complete Help to Using AirPlay and Miracast

    Learn how to use AirPlay or Miracast with your phones: https://any-cast.com/pages/help

     

    Setup for Mac

    K4

     

    1. Press the button on AnyCast dongle to switch to AirPlay mode. You will find SSID and Password of AnyCast on your TV screen.
    2. Connect your Mac to AnyCast via Wi-Fi.
    3. Click on AirPlay and then select AnyCast as target.
    4. Your Mac screen will be shown on your TV.

     

    Setup for Windows

    K4

    1. Press the button on AnyCast dongle to switch to Miracast mode. 
    2. For Windows 8.1, execute “Windows Start Menu > Settings > PC and devices > Devices > Add a device”, and then search for AnyCast dongle.
    3. For Window 10, execute “Windows Start Menu > Settings > Connected devices > Add a printer or scanner”, and then search for AnyCast dongle.
    4. Your Windows screen will be shown on your TV through AnyCast connection.

    Note: Windows 7 users, please directly download the EZMira for Windows >>

     

    Setup your AnyCast

    K4

    1. Press the button on AnyCast dongle to switch to Setup (AirPlay) mode. You will find SSID and Password of AnyCast on your TV screen.
    2. Connect your phone or laptop to AnyCast via Wi-Fi.
    3. Launch web browser on your phone or laptop, then access the IP address (http://192.168.203.1) of AnyCast to enter setup page.
    4. The setup page of AnyCast will be shown on your phone or laptop.

     

    Settings and Firmware Upgrade

    • Internet: Connect your AnyCast to local Wi-Fi network.

    Note: The connection between AnyCast and your device may be disconnected when AnyCast connects to local Wi-Fi network instead.

    • Language: Change the language of AnyCast
    • Password: Change the password of AnyCast
    • Default Mode: Select AirPlay or Miracast as boot default mode
    • Resolution: Change the output resolution of AnyCast
    • EZAir mode:
      • Mirror only (recommended).
      • Mirror+streaming for iOS 11.1 and 11.2.
    • Upgrade: upgrade the firmware of AnyCast.

    Note: Requires internet connection to your AnyCast dongle.

    IMPORTANT! Please upgrade to the latest version in order to support all the latest devices.

       

        Repair Tool

      In rare events where you might have trouble OTA the dongle firmware to the latest version, you may consider using the Repair Tool to upgrade your AnyCast dongle.

      Check out K4 repair tool >>

       

      Customer Service

      Support@Any-Cast.com

      We’d love to hear from you!




      Also in User Manual

      G2 - User Manual
      G2 - User Manual

      In this user manual, we are going to introduce how to install G2, how to download EZMira app and setup for your iOS/Android phone, how to connect to home WiFi router and setup for Google Home (Android), and how to setup for your Mac /Windows PC/laptop.

      Continue Reading

      M100 - User Manual
      M100 - User Manual

      AnyCast is a WiFi display receiver, which supports the Miracast standard for Android & Microsoft Windows, and DLNA for the home multimedia application. Furthermore, it also complies with Apple Airplay mirroring for iOS and Mac OS X. Enjoy screen mirroring with AnyCast!

      Continue Reading

      M9 - User Manual
      M9 - User Manual

      AnyCast is a WiFi display receiver, which supports the Miracast standard for Android & Microsoft Windows, and DLNA for the home multimedia application. Furthermore, it also complies with Apple Airplay mirroring for iOS and Mac OS X. Enjoy screen mirroring with AnyCast!

      Continue Reading